Young Regulator DEMAND-AIR CO2 Fresh Air Damper
Please call for price:1-888-257-3719
Click thumbnail to view image.
Young Regulator CO2 MODULATING Fresh Air Damper. Wall or Duct Probe CO2 Sensor. DEMAND-AIR modulates based on CO2 levels. Sizes up to 48" X 48".
DEMAND RESPONSE VENTILATION. ASHRAE Standards 62.1 & 62.2 recommend Building Ventilation requirements to insure healthy and productive environments. Exhausted Stale Air for introduced Fresh Air must be re-conditioned at dollar cost. Demand Response Ventilation is limiting ventilation based on actual zone demand.
| Young Regulator DEMAND-AIR Fresh Air System combines a Modulating Damper with a CO2 Carbon Dioxide Wall Sensor or Duct Probe Sensor |
- Demand-Air CO2 Dampers may not be Returned
- Modulating Damper opens proportionally based on the actual CO2 concentration in the space
- Damper Modulating Cycle 800 ppm - 1200 ppm
- Wall Sensor Coverage 7500 Sq Ft Maximum
Duct Probe Sensor 8.03" Insert X 1" Dia - Single Beam Infrared Sensing Technology (NDIR)
- Calibration Lifecycle - 15 Years
- Damper Sizes up to 48" X 48"
- Belimo Brushless DC Motor 2-10VDC Input
- 24V / 1.5 Watts / 3 VA / <35 dB(A)
- Auxillary End Switch available
- Includes 24 VAC Transformer
- Timing - 95 seconds constant
- Torque - 45 in lbs
- Frame 16 ga Galv Steel / 3.5" Wide
- Blade - 16 ga Galv Steel / OIl Bronze Bushings
- Low Leak EPDM Rubber Seals
| Click to view DAMPER SUBMITTAL SHEET |
| Click to view WALL SENSOR INSTALLATION |
| Click to view DUCT PROBE INSTALLATION |
